Driver Mediatek 6577 Download

On my previous article,, I guide you on installing MT65xx USB Preloader drivers in windows 8/8.1/10. Before flashing you are required to install the drivers but sometimes you messed up and failed to install the right drivers for your mediate, however if you installed the wrong driver chances of getting an error on SP Flash tool are also not possible. One of the common errors is S_FT_DA_NO_RESPONSE which cause by the wrong USB driver, for more lists of error visits.

I know you are here for the guide, so let’s get into the topic. This guide focus on installing MediaTek USB VCOM drivers on Windows 8, 8.1 and 10.

Since here every day again and again problems with the USB VCOM driver installation for MTK6577 appear Phones, here is a short guide to the installation, and a final, successful test with SPFlashtool! Rockwell Arena 12 Crack Download. Installation of the USB VCOM driver: [1] With USBDeview, clean up your PC from all possible old MTK VCOM entries, then reboot your PC.

Aug 16, 2014. Hi Chinese Mobile Users We Are Sharing a quick guide of installing MTK6577 Usb drivers on PC Windows 7 x32 or x64, MTK chip is also used in China Mobiles. We will provide you Guide for installation and Download for these drivers. As we know MediaTek uses VCOM Driver for fastboot and flashing. Dec 14, 2014. [9] Now a MediaTek PreLoader USB VCOM should appear for a brief moment in the Device Manager entry! APP DOWNLOAD. [10] At the moment the entry double click and click on 'Update driver' under the tab 'Driver'. [11] With the wizard in the unzipped MTK 6577 USB VCOM drivers navigate and select.

[2] Smartphone is switched off, and still dont connect via USB to the PC. [3] Open Device Manager and leave it open! [4] Your switched off Smartphone with inserted rechargeable battery via USB connect now on the PC, you should now see a MT65xx preloader in the Device Manager.

(With some MTK6577 Smartphones should be installed without battery. Please before hand inform.) [5] now launch the Installdriver.exe from the unzipped MT6577 USB VCOM drivers folder. Confirm the installation of unsigned drivers [6] now! (W7 x 64 this confirmation comes later in the manual installation!) After the installation is complete, you have no entry in the Device Manager, it is correctly!

[7] PC reboot! [8] Open Device Manager and open the switched-off Smartphone via USB to the PC release, now connect (same USB port!) [9] Now a MediaTek PreLoader USB VCOM should appear for a brief moment in the Device Manager entry! [10] At the moment the entry double click and click on 'Update driver' under the tab 'Driver'. [11] With the wizard in the unzipped MTK 6577 USB VCOM drivers navigate and select the folder for your operating system.